2019-23 Canam Commander Models Plug & Play Whip Signal System
Introducing the TurnPro Plug & Play Signal System designed for whips! These kits are model specific, and plug in directly to your taillight utilizing the brake light feature of your whips.
NOTE: This system is intended to be used with whips only. Front LED’s or any other features are included with this kit. Adding any front LED’s are up to the installer to do so on their own.
ROCKER SWITCH OPTIONS: Vertical for mounting your turn rocker vertically / or Horizontal for mounting your turn rocker horizontally. (Vertical is pictured in this listing)
FUNCTIONS: Brake / Left & Right Turn Signals
POWERING: Different battery lengths available for models that have the battery under the hood or under your seat! NOTE: These are not meant to power your whips but the turn signal function only.
INSTALLING: Our harness from the turn switch & brake are 8’ in length. Most whip controller installations are meant to be installed normally towards the center of the machine. Power harness is determined by your selection at the time of your purchase.
Every brand has different color codes for their whip controllers regarding the functions. We do not include any type of instructions regarding what wire goes where. Most common method (Green = Right Turn / Yellow = Left Turn / White = Brake “5150 Whips) or otherwise labeled from the manufacturer.
BEFORE PURCHASING: Make sure the brand of whips you have are capable of utilizing turn signals. Every brand varies regarding functions and some act differently according to the whip manufacturer specs. Our whip signal systems are tested with 5150 Whips brand.
⚠️ California Proposition 65 Warning ⚠️
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.