Denali Standard Plow

DENALI Standard Series ATV/UTV Snow Plows are made to handle the toughest conditions including sand, snow, and ice. The "Easy-Connect" design  makes attaching and detaching the plow an extremely easy process. This Center Mounted plow disperses the force of impact to the sturdiest part of the UTV / SxS, preventing damage to the front end or other vehicle parts from sudden impact. 

Please Note: all DENALI UTV Plow Systems require a winch (not included) to raise and lower the plow blade. We recommend a VIPER Elite, Max or Midnight winch with an automatic brake. 

Kit Contents: 

  • UTV Snow Plow Blade - Straight
  • Pushtubes
  • Two (2) Wearbars
  • Skid Feet
  • Installation Hardware and Instructions


Blade Features: 

  • Snow Plow Blade (19 inches scoop) and leading horizontal supports are formed from a single piece of 11 gauge steel
  • Four 7 gauge ribs run the full height of the blade
  • Three additional 7 gauge horizontal stabilizers support the deepest point of the blade
  • 65° attack angle and over center design ensures snow rolls up and is thrown forward
  • Two (2), Replaceable 7gauge steel wear bars included with every kit
  • Height and angle adjustable skid feet included 
  • 3 Year Warranty


Pushtube Features: 

  • Impact Resistant Reinforced Pivot Assembly - 2 additional support bars for maximum durability & strength
  • Turn system allows you to easily position your plow in 5 different angles - 0, 12.5°, 25°
  • Simple detachment system with the pull of a pin
  • Structural tube steel cross bar for added lateral rigidity
  • Quick Release Pins included
  • Extended Push Tubes are designed to be used with SxS/UTVs that have tracks


Optional Hydroturn Features: 

  • Hydraulic system is completely sealed for life, no need to purchase hydraulic fluid, bleed lines, maintain a reservoir level or change the fluid
  • Change the blade angle while driving; full radius turn in just 5 seconds
  • Heavy duty chrome plated ¾″ cylinder shaft
  • No modifications necessary - bolts directly to the Denali UTV Plow Push Tubes
  • Wire harness utilizes weatherproof connectors


Optional Plow Pulley Fairlead Features: 

  • Roller
    •      Replaces the winch fairlead during the plow season
    •      For use with Steel AND Synthetic cables
    •      Curved cable groove helps eliminate flattening and breaking of cable
    •      Bolt Patterns:
    •         Standard Spool: 3″ x 4.875″
    •         Wide Spool: 3″ x 6.67″

 

  • Sheave
    •      Includes pulley, 1/4″ clevis hook and nylon strap
    •      Allows greater precision when raising/lowering plow blade and increases the angle of pull

 

  • Cable
    •      12′ length, 1/4″ diameter
    •      Single braid, dyneema rope with galvanized steel thimble/eyelet

 
60" Currently Out Of Stock! 

Options:
View Cart

ADD DENALI Plow Markers $45.00

Add to Cart
View Cart

ADD DENALI Hdyroturn 

Option:
View Cart

ADD DENALI Plow Pully Fairlead 

Option:
View Cart

                                 Denali Pro Series Plow

DENALI Pro Series UTV Snow Plows are ready for the snow season! Our team of engineers designed a Cadillac plow at a reasonable price so you don't have to skimp on quality to save money. This Center Mounted plow disperses the force of impact to the sturdiest part of the UTV and SxS, preventing damage to the front end or other vehicle parts from sudden impact. 

Please Note:All DENALI Snow Plow Systems require a winch (not included) to raise and lower the plow blade. We recommend a VIPER Elite, Max or Midnight winch with an automatic brake. 


Kit Contents:

  • UTV Snow Plow Blade - County / DOT Style
  • UTV Pushtubes
  • One (1) Reversible Wearbar
  • Rubber Flap
  • Rubber Flap Stabilizer Bar
  • Skid Feet
  • Plow Markers
  • Plow Mount (machine specific)
  • Installation Hardware and Instructions


Blade Features:

  • County-style blade (curved design) cuts wet snow & throws powder; made of 12-gauge steel
  • Impact Resistant Reinforcement System, includes leading edge stiffener and vertical stabilizer bar
  • Sand-blasted powder coat with epoxy primer & TGIC Polyester top coat for corrosion protection, UV resistance and durability
  • High strength, high yield 3/16 thick Grade 50 steel wear bar
  • Angled Blade : 16 on the low side; 23 on the high side
  • Rubber flap & stabilizer bar with rubber flap
  • Height AND angle adjustable steel skid feet
  • 3 Year Warranty
  • Made in the USA


Pushtube Features:

  • Impact Resistant Reinforced Pivot Assembly - 2 additional support bars for maximum durability & strength
  • Turn system allows for easy positioning of the blade in 5 different angles - 0, 12.5°, 25°
  • Simple detachment system with the pull of a pin
  • Structural tube steel cross bar for added lateral rigidity
  • Quick release pins included
  • Extended Push Tubes are designed to be used with SxS/UTVs with tracks installed


Optional Hydroturn Features: 

  • Hydraulic system is completely sealed for life, no need to purchase hydraulic fluid, bleed lines, maintain a reservoir level or change the fluid
  • Change the blade angle while driving; full radius turn in just 5 seconds
  • Heavy duty chrome plated ¾″ cylinder shaft
  • No modifications necessary - bolts directly to the Denali UTV Plow Push Tubes 
  • Wire harness utilizes weatherproof connectors


Optional Plow Pulley Fairlead Features: 

  • Roller
    •      Replaces the winch fairlead during the plow season
    •      For use with Steel AND Synthetic cables
    •      Curved cable groove helps eliminate flattening and breaking of cable
    •      Bolt Patterns:
    •         Standard Spool: 3″ x 4.875″
    •         Wide Spool: 3" x 6.67″

 

  • Sheave
    •      Includes pulley, 1/4″ clevis hook and nylon strap
    •      Allows greater precision when raising/lowering plow blade and increases the angle of pull

 

  • Cable
    •      12′ length, 1/4″ diameter
    •      Single braid, dyneema rope with galvanized steel thimble/eyelet

 
 

Contact For Price!   In Stock!

 

                            Denali 72" UTV Universal Plow

  • DENALI UTV Universal Snow Plows are ready for the snow season! Our team of engineers designed a snow plow at a reasonable price so you don't have to loose on quality to save money. The ″Easy-Connect″ design will make attaching and detaching the snow plow an extremely easy process. This Center Mounted plow disperses the force of impact to the sturdiest part of the UTV, preventing damage to the front end or other vehicle parts from sudden impact. Perfect plow for medium duty use!

    Please Note: All DENALI Plow Systems require a winch (not included) to raise and lower the plow blade. We recommend a VIPER Elite, Max or Midnight Series winch. 

    Kit Contents:  
    72″ UTV Snow Plow Blade 
    UTV Pushtubes 
    Wearbar 
    Skid Feet 
    Rubber Flap 
    Plow Flags 
    Plow Mount 
    Installation Hardware and Instructions 

    Specs:  
    Snow plow blade (17 inch scoop) made of 12-gauge steel 
    Horizontal and vertical stabilizer supports made from 10-gauge steel 
    65 degree attach angle and over center design ensures snow rolls up and is thrown forward 
    Pushtubes easily position the snow plow blade in 5 different angles 0, 12.5 & 25 degrees 
    Reversible & replaceable wearbar 
    Height adjustable steel skid feet 
    1 Year Warranty 

    Fitment  
    most UTV models

 
 

Contact For Price!   In Stock!

 
Print Print | Sitemap
© TurnPro Signals